Why should you clean your sensor?
If you have an interchangeable lens camera you will (at some stage) need to clean your sensor. It is as simple as that. Every time you change your lenses in the field you're inviting dust into your camera. It will stick onto anything inside there that it can. Aside from the viewfinder, the main place of concern is the sensor.
A typical clean in a shop can run you upwards of £30 (not including any shipping) and this doesn't include the time you are without a camera. So take 5 min to learn just how easy it is and learn how you can do it yourself.
A word of advice up front: Make sure you use the right tools to clean your sensor. The biggest risk of undertaking this procedure is that you'll damage your sensor. In saying that they are not as sensitive as you would imagine. I have done this many times and have never had a problem.
Which Cleaning Swabs To Buy
I have used these generic sensor cleaning swabs that you can pick up for around £10 or even less when on sale. Click below if you are in either of these countries:
How to clean your sensor [VIDEO]
Step by Step
- Go inside for this one. You need to a clean space that is free of dust and other dirt.
- Put a fully charged battery into your camera. Activate the sensor cleaning mode. This should be in the system settings of your camera. A quick google search should help you find it if you're lost: "sensor cleaning mode YOUR CAMERA HERE". The sensor will then be uncovered.
- Use an air blower to take any easily removable dust from the sensor. I do this often as it is a fast and easy way to remove light dust from the sensor. You'll need an air blower such as this one which you can get for very little money.
- Now take the swab and insert it into the camera on a 45-degree angle then straighten it up so that it reaches all the way across the sensor.
- Wipe the sensor from left to right (or right to left). Turn the swab over and repeat if necessary.
- Remove the swab and turn the power off on the camera. Affix lens and retest for any sensor dust.
The following images are what I took before cleaning and after cleaning. They are JPEGS taken directly from the camera.
Recommended settings when searching for sensor dust: ISO 100 at f22 on a TRIPOD! See video for further details.
You should now have a clean sensor. Repeat should you need to remove any further dust. If that doesn't work then you'll need to look at "wet cleaning your sensor". Essentially, you can add a few drops of cleaning solution to the end of the swab. But personally, I have never needed to do this.
It seems like a daunting procedure at first, but trust me it's relatively easy to do and will save you a lot of time and money in the long run. Just give it a try, carefully!
Thanks for reading. Hopefully, this tutorial has helped you get your sensor clean. If you have any further questions please let me know on any of the social channels or in the comments section below.
Join the Journal
If you are enjoying the content being put out on Cultured Kiwi then consider joining over 1200 people who love the monthly newsletter. You'll get free monthly lightroom presets beginning with my Architectural Photography preset below: